What You Should Know When Choosing a General Contractor

With the arrival of spring and the start of a new construction season, you may be thinking about renovating your home. Perhaps you want to build a deck or expand your home to accommodate growing family members. Whatever your plans, you’ll need to get it done sooner rather than later. That means it’s time to look for a general contractor (also known as a building contractor) — someone who specializes in managing large-scale construction projects, such as renovating or expanding a home. If you’ve never worked with a general contractor before, you might be wondering what distinguishes them from other tradesmen. Let us explain: general contractors are the managers of larger-than-life construction projects that require expertise in various fields. They oversee everything from site planning and design, through permitting, scheduling and budgeting all the way through to completion — after which they take responsibility for making sure everything is working properly for years to come.

What is a general contractor?

A general contractor is a specialized type of construction professional that takes responsibility for managing large-scale construction projects. They oversee everything from beginning to end, taking care of scheduling and budgeting all the way through to completion. General contractors make sure that everything is ready to happen when they say it will happen. Since they oversee everything from the planning stages, they have a good idea of what their project will entail. This allows them to manage their budgets and schedules effectively so that things don’t get out of hand. If you’re thinking about hiring a general contractor for a project, there are some things you should know about these professionals: They usually specialize in a certain field of construction or trade, such as carpentry or plumbing They take care of all aspects of the job logistics including permits, design, scheduling and budgeting Their experience in managing large-scale projects makes them well suited for high-stress jobs like renovation or expansion

Before choosing a general contractor, you should ask yourself:

1. What type of construction project are you looking to work on? 2. How large is the project? 3. What’s your budget? 4. Do you have any special needs or requirements that need to be met, such as a certain level of expertise in green building practices or accessibility for the disabled? 5. What kind of company culture do you want to work with?

How long has the general contractor been in business?

Generally speaking, a general contractor has been in business for more than three years. That’s because it takes time to build up knowledge and experience. A company that is still relatively young might be lacking in experience and could also not have a long history of working on projects like yours. A general contractor should also be bonded and licensed. This ensures that if your project goes wrong, the general contractor will take responsibility for any damage caused to you or your home during construction. A good sign that a general contractor is reputable is the number of positive reviews they have received from previous clients — especially ones with similar needs to yours. A company with a lot of positive reviews should be able to provide you with an honest assessment of their work so you can make sure you’re making the right choice for your home renovation project.

Ask for references and do your research

When searching for a general contractor, be sure to ask for referrals from friends and family members. When you’re trying to find someone, you should also do some research on general contractors in your area, checking out their websites, reading reviews from past customers and even contacting the local Chamber of Commerce (if one exists). You can also look into what licenses they hold or what certifications they have. The best way to prepare for your project is to collect all this information before you start looking for a contractor. The more prepared you are, the better your chances of getting a great deal, no matter the size of your project.

Top taping and sheetrock tips in Colorado Springs

If you’ve ever tried to install drywall on your own, you know that DIY drywall tips can be very helpful. The common recommendation is to purchase a good drywall saw and a tape measure so you can accurately measure the dimensions of the drywall joint you are about to joint. Most importantly, have a friend or family member help you hold down the joint, or place the tape for the first few nails. It’s a good idea to practice your technique in front of a mirror so you can see how much space you will be leaving behind when you hammer the nails into place. This will make measuring much easier when you actually reach for the tape.

Once you’ve got your measurements correct and can see what you’re working with, it’s time to go shopping for your diy drywall lift kit. Your chosen supplier should be able to assist you fully in making your selection. In particular, he or she should be able to tell you if you need to select different fasteners or types of fasteners such as tongue-and-groove and overlap. These fasteners are important to the process because you will want to anchor your framing to the drywall, and these fasteners are typically referred to as “snap and lock” fasteners. Overlap and tongue-and-groove fasteners are usually used for standard sized holes.

One type of fastener that you’ll come across is the gypsum board. Gypsum boards are used primarily for the bottom of hanging drywall panels, but they can also be used for exterior framing. It’s not recommended that you use the cheaper drywall glue with gypsum board, but many do. If you do, be sure to only use drywall glue and avoid any other type of adhesive.

After you have your supplies, you’ll need some tools and a level. To start framing your DIY drywall panels, you will need a drywall knife, a cordless drill, a framing square, screws, and nails or screws. You can use any appropriate tool to accomplish this task. Start by nailing the first drywall panel to the framing square with the nails or screws.

Framing the next panel will require you to use drywall nails or screws. You’ll find that there are several different kinds of drywall nails and screws available, so it’s a good idea to purchase a variety to ensure you purchase the right ones for your project. Remember, when you purchase nails or screws, always measure the holes before driving them into your drywall. Use drywall anchors to center the panel on the studs. You can use drywall anchors to center the panels over many different kinds of framing. Anchoring your panels properly will ensure an even panel which will reduce the possibility of your drywall falling during windy or moist conditions. These are all proper techniques used by some of the best drywall contractors, even when they are performing drywall repair

Once you’ve secured each panel to the studs with drywall anchors, you can proceed to the next step of the framing process. This next part is called clipping. This involves removing the trim around the edges of the drywall area. You’ll find that a cordless drill is an excellent tool to use when cutting the trim due to its ability to penetrate the drywall.

Clip the excess drywall nails or screws from the wall. Use the screwdriver to pry the drywall nails or screws out from the wall. You will probably need to work in small areas to remove as much of the drywall as possible without damaging the drywall material. If you have a bit of a problem with stripping, you can purchase a strip of drywall which will serve as a temporary fix. Once you have the nails or screws out, you will be left with a clean, open frame which will allow you to continue with your installation.

Once the screws are out, it’s time to replace them. Although you may have to purchase new drywall nails and screws, the most important part of the job is to re-caulk the joints between the exterior sheetrock and the interior drywall. The caulking can be purchased at any home improvement center. After you’ve caulked the joints, you should put one more layer of joint compound between the sheetrock and the drywall. This extra joint compound will make the drywall stay in place and provide extra strength to the drywall as you apply it.

Build-up Roofing For Business – What Is It? What Are the Pros and Cons? Albany Roofing has some ideas

Building up a roof is one of the most common roofing systems used on low-sloped or flat roofs, mostly for commercial buildings. Its name comes from the multilayers of materials that create a seamless, waterproof roof. These flat roofs include several components, and they can offer you a number of benefits. Here, we’ll cover everything you need to know about BURs-pros and cons-so you can decide to install one or not!

BUR – what is it?

Flat roofing materials that are built-up are called built-up roofing systems, or BURs. A variety of materials are applied to create the final result, including bitumen, felt, asphalt, and other materials. Typically, they are applied layer by layer and are relatively easy and quick to install. Over the past century, BURs have also been used as a flat roofing material. Despite these changes and morphs, they are still an advantageous and effective material to use for a flat roof.

Why is BUR useful?

It’s great for roofs that have heavy traffic (like commercial buildings), since built-up roofs are easy to install and provide long-term stability against harsh weather conditions like wind and rain. The investment lasts for many years, and they provide excellent durability. Building up a roof can be done in many ways, and using many materials is not a requirement. Here’s a basic example of what goes into a standard BUR:

Insulated Layer

Roofing insulation is installed above the roof decking and roof sheathing. Keeping the roof sheathing moist and warm, rigid foam insulation makes sure your building is protected from the cold. Underlying the roof sheathing with insulation is less effective.


BURs commonly use asphalt as the first layer, but coal tar or cold-applied adhesive can also be used. Heat is applied to the asphalt prior to spreading it flat and evenly across the roof surface with a mop or some other type of spreading tool.

Cover Board

In addition to providing extra durability under the asphalt layer, the cover board is usually made from lightweight, assembled composite material. In addition to creating a flat surface on which to build layers of asphalt and plywood, it helps with water resistance and longevity.

Asphalt & Ply Sheets

A layer of hot asphalt is laid down, followed by a sheet of single-ply asphalt, followed by another layer of asphalt and a sheet of single-ply asphalt, and so on until three to four layers of each are in place. You need to alternate the layers of your roof to prevent it from being damaged by strong winds, heavy rains, or extremely high or low temperatures.

Roof coating that reflects light

It is crucial for protecting against ultraviolet light to have this layer. Today, most commercial roofs have a highly reflective top layer, allowing them to reflect as much as possible of the sun’s ultraviolet rays, keeping your roof cooler and keeping your energy bills low.


Lastly, the gravel roof is covered with a layer of gravel, usually about an inch thick, according to your preference. Providing this top layer with corrosion protection and debris protection is the ultimate goal. Moreover, gravel protects the layers beneath, so they last longer and require fewer repairs because of the heavy blow of severe weather.

Building up a roof’s pros:

Building up a roof on a flat or low-slope roof is a good idea because of its versatility and excellent water repellency. As they are constructed with heavy materials, they offer protection against the elements like wind and rain as well. Because of this, you will have fewer repair needs down the road.

Weatherproofing at its best

Your roof is sure to withstand even the harshest weather conditions thanks to its multi-layered design. In case you install and maintain your asphalt and bitumen properly, your roof will be watertight to prevent water from leaking inside.

Protection from UV rays

Reflective coatings on top of your roof will provide protection from harsh UV rays, which otherwise heat up your roof and make your HVAC work harder, and wear down the materials on your roof.


A high amount of heat is necessary to ignite Tar, making it extremely flame-resistant. Consequently, you can rest easy knowing your building has some safeguards against fire spreading quickly if a fire spreads on your roof.


Built-up roofs require very little maintenance. With proper installation and minimal maintenance, a built-up roof can last 20 to 40 years. Every year, you need to make sure there are no cracks, holes, or pools of water. A few repairs may be necessary over its lifetime, but a whole replacement will not be necessary until many years down the road.

Installable and maintainable at an affordable price

Built-up roofs are among the most economical flat roofing materials. The cost of a roof replacement depends on many variables, including the materials used, the location, and which contractor you hire. Considering its long lifespan, ceramic tiles are one of the most cost-effective materials, even though their prices can range from $250 to $800.

A built-up roof’s Cons:

The downside to built-up roofing is its general wear and tear and the possibility of storm damage, despite its affordability and long lifespan. One roofer Albany NY has to offer, has agreed with these claims, for both commercial roofing and residential roofing projects.


Built-up roofs are frequently damaged by freeze-thaw cycles. Before starting any job, you should check whether your warranty covers workmanship when cracks develop in your BUR.

Water Pooling:

It is possible for your flat roof to pond water if it experiences heavy rain that passes unchecked. A water leak can eventually damage or weaken structural components in built-up roofs.


The last thing you want is a leaking roof paired with a hot sun causing blisters. Built-up roofs are more prone to tearing when they have blisters, especially in areas with high foot traffic. You should deal with it right away since it is dangerous.

During installation, maintenance, and periodic inspections, built-up roofs can avoid most of their downsides. Built-up roofing is an excellent choice if you want a durable roof for a reasonable price.